Discover all the factors you should consider when choosing your car's brake fluid.: Understanding Brake Fluid
What is brake fluid, and why do you use it?
Brake fluid, a type of hydraulic fluid, transfers power within your vehicle’s brake system. It’s what ensures that when you put your foot on the brake pedal, your vehicle comes to a stop.
Like all hydraulic fluids, brake fluid is non-compressible. That means when pressure from the brake pedal is applied at one end of the brake system, the fluid in a vehicle’s brake line is forced to move through that system. This force is transferred to a vacuum powered brake boost, then all the way to the brake pads that ultimately press against a vehicle's wheels and bring it to a halt.
For this reason, brake fluid is a critical component of your vehicle. Anything that might degrade the quality of your fluid -- such as moisture absorbed from the air -- will hurt its performance and may ultimately hinder your vehicle’s braking.
What are the different types of brake fluid?
Two of the main types of brake fluid that you are likely to see are DOT 4 and DOT 5. DOT 4 is glycol-based, while DOT 5 is silicon-based. DOT 5 is distinct in that it will not absorb water and can sustain higher pressure before boiling into gas.
The higher number indicates a higher boiling point, which is a critical factor in brake fluid. Remember, hydraulic fluids work because they are non-compressible. When pressure is applied to the fluid in a closed system, that fluid is forced to move rather than shrink in volume. But that is not the case with a gas, which will often compress in response to outside pressure.
That means it’s important that brake fluid remain liquid and not boil off into a gas. It also means that you might want to choose a fluid like DOT 5, with a higher boiling point, if you’re going to be putting a lot of pressure on your braking system, which will tend to raise its temperature.
How often should you change brake fluid?
A typical rule of thumb is every one or two years, but that will depend on the recommendation of your vehicle manufacturer.
The most common threat is moisture absorbed from the air. Water in brake fluid can lower its boiling point, which will tend to reduce pressure within the braking system and hurt performance for the reasons mentioned above. In addition, moisture can begin to corrode some of the braking system’s other components.
As brake fluid ages, it tends to go from clear or light-brown to a darker color. Moisture contamination will sometimes have the same effect, so cloudy-looking brake fluid may be a sign it’s time to get it replaced. And you can have a professional check your fluid’s moisture content any time.
Can you change it yourself?
It’s generally better to have a trained mechanic change your brake fluid than to try and handle the job yourself. Old fluid must be completely drained from the system, and it’s a substance that must be handled with care. It’s also important not to mix certain grades of brake fluid. For instance, mixing a glycol-based fluid with a silicon-based fluid will cause the latter to deteriorate.
E-Wallet
Did you know that you can pay for your gasoline and diesel purchases from the comfort of your vehicle?